09 / 03
2019
Following the launch of its Paris outpost, Dutch architecture firm KAAN Architecten together with French office PRANLAS-DESCOURS architect & associates (PDAA), present the new Chambre de Métiers et de l'Artisanat (CMA) Hauts-De-France in Lille (France).
© Fernando Guerra FG+SG
Architect: KAAN Architecten - PRANLAS-DESCOURS architect & associates
Client: Chambre de Métiers et de l'Artisanat Hauts-De-France, Lille
Location: Lille, France
Year: 2019
Total floor area: 14.800 sqm
Park area: 2 hectars
Project team: Christophe Banderier, Delphine Bresson, Louise de Chatellus, Sebastian van Damme, Gustav Ducloz, Paolo Faleschini, Raluca Firicel, Marylene Gallon, Michael Geensen, Renata Gilio, Julie Heathcote-Smith, Kees Kaan, Maud Minault, Hannes Ochmann, Vincent Panhuysen, Fabien Pinault, Ismael Planelles, Jean Pierre Pranlas-Descours, Ana Rivero Esteban, Anne Roullet, Dikkie Scipio, Marianne Seyhan
Structural advisor: EVP Ingénierie, Paris
Financial advisor: Martin & Guiheneuf, Paris
Installation and Sustainability advisor: Martin & Guiheneuf, Paris
Façade advisor: T/E/S/S atelier d'ingénierie, Paris
Kitchen installation advisor: Creacept restauration, Lezennes
Site work: URBATEC, Bussy-Saint-Georges
Landscape: TN+, Paris
© Fernando Guerra FG+SG
From the architect: The winning entry of an international competition for Eurartisanat campus, this building works as a new gateway of the city and is part of its urban development initiated in the Eighties with Euralille district, Euratechnologies and Eurasanté.
© Fernando Guerra FG+SG
The CMA is set along the edge of the former Seventeenth Century Vauban fortification, now replaced by a high-speed ring road. The northern border of the site is defined by a railway line and the botanical garden — Jardin des Plantes de Lille. To the south, Rue Abélard defines the perimeter of a wider masterplan area designed by KAAN Architecten and PDAA, and comprising of CMA headquarters, a future complex of five buildings and a lush park spanning the site as an extension of the nearby garden.
© Fernando Guerra FG+SG
With its minimalist esthetics and elegant transparency, the monolithic building gives an embracing and protective gesture towards the surrounding nature, reinforcing the dialogue between the diverse elements of the area.
© Fernando Guerra FG+SG
In broad horizontal strokes, the CMA spreads over three floors rising from a square shaped footprint of 80 by 80 meters, providing both educational functions and spaces dedicated to supporting craft business. Each floor holds a strong connection to the green landscape: on the first floor, KAAN Architecten and PDAA have designed a prominent cantilever that frames a scenic view of Lille and the gardens.
© Fernando Guerra FG+SG
The building features two public squares on different levels. On the ground floor, is the new Place des Artisans (south), while a large terrace to the north of the first floor aligns the project with Rue du Faubourg d’Arras and connects to it with a bridge. Both public entrances are linked by an enfilade of representative spaces: southern square, entrance hall, the auditorium and its foyer, as well as a wide opening overlooking the north terrace. Moreover, each entrance serves the two main architectural realms: the apprentice training centre and offices devoted to supporting craft business procedures.
© Fernando Guerra FG+SG
The CMA is symmetrically organized around six patios that provide natural light for most circulation spaces and divide the building into four clusters housing different realms and spanning through the whole three levels. Functions vary from local and regional administration to research and educational facilities (hairdressing school, cooking school, laboratories, classrooms). The new building acts as a hub for both the Chambre and the associated training schools, which had been previously scattered throughout the historic city centre of Lille.
© Fernando Guerra FG+SG
In order to interact with the urban fabric and the surrounding landscape, the architects have paid great attention to the use of natural materials: glass and stone. The ground and second floors are wrapped by a modular double glass facade that ensure climate control and quality acoustics. Spanning the full floor height, each module features an inner polished aluminum window which can be opened and a fixed outer glass panel with a reflective print that gradually fuses to create a fully transparent zone at eye level while blending the building into nature.
© Fernando Guerra FG+SG
Moreover, the patio façades which feature large polished aluminum window frames are clad in Vals Quartzite, a very solid, compact and frost-resistant stone from Switzerland. The same stone has been used on the patio floors as well as in the entrance hall to enliven the link between exterior and interior.
© Fernando Guerra FG+SG
Through its solid materiality, Eurartisanat aims to both articulate, absorb and reflect the surrounding landscape while at the same time standing out as a new iconic element, an inhabited landscape dedicated to the public sphere.
© Fernando Guerra FG+SG
The Chambre de Métiers et de l'Artisanat, together with ISMO – Institute des Sciences Moléculaires in Orsay, represent two of the recent projects designed by KAAN Architecten in France. Two large mixed-use complexes are also in the final phase of construction: one close to EuraTechnologies area in Lille, the other in the ZAC Bottière-Chénaie in Nantes. Meanwhile, an office complex in Aubervilliers, Paris, is currently at design stage and is set to revitalize the former logistics area at the borders of the city.
© Fernando Guerra FG+SG
Alongside the CMA, PDAA has recently delivered the Black Diamond project consisting of a parking lot, offices and sports facilities, that received the ADC architecture prize for the mixed-use building of the year. PDAA is currently developing several projects on both architectural and urban scales, such as the Satory development in Versailles, one of the main projects in the Greater Paris area (550.000 sqm of urban project, 12 hectares of park and test tracks).
[ VIEW MORE ARCHITECTURE IN FRANCE ]
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
YOU MAY ALSO LIKE: KAAN Architecten opens new Paris office
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
YOU MAY ALSO LIKE: Crematorium Siesegem by KAAN Architecten
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Fernando Guerra FG+SG
© Antoine Guilhem Ducléon
YOU MAY ALSO LIKE: Green Office® ENJOY building in Paris by Baumschlager Eberle Architekten and SCAPE
© Antoine Guilhem Ducléon
© Antoine Guilhem Ducléon
© Antoine Guilhem Ducléon
© Antoine Guilhem Ducléon
YOU MAY ALSO LIKE: Mix of commercial activities Binet - Paris XVIII by ECDM Architectes
© Antoine Guilhem Ducléon
© Antoine Guilhem Ducléon
© Antoine Guilhem Ducléon
© Sebastian van Damme
© Sebastian van Damme
© Sebastian van Damme
© Sebastian van Damme
© Sebastian van Damme
© Sebastian van Damme
© Sebastian van Damme
Chambre de Métiers et de l'Artisanat Hauts-De-France by KAAN Architecten and PRANLAS-DESCOURS architect & associates
09 / 03 / 2019 KAAN Architecten and PRANLAS-DESCOURS architect & associates reveal the outstanding Chambre de Métiers et de l'Artisanat (CMA) Hauts-De-France, LilleYou might also like:
Recommended post: Forest house concept by Imola
Popular today
08/12/2024
Minimalist duplex apartment blends past, present and future | Experience Timeless Harmony